Backordered Part? Find updates on backordered or out-of-stock parts here:
$1,598.00
In stock
Our Quattro Rhodium trailer mover is a legend. Voted the ‘best caravan mover 2022’ by Practical Caravan magazine. The EGO500 has been refreshed with updated electronics and new colour scheme, the Rhodium manual engage mover is the perfect way to move your trailer. It comes equipped with the traditional Basic Handset for hassle free and safe caravan control.
Works on most surfaces in most conditions. Control when going up or downhill, control when hitching, control when unhitching. Supplied with complete fitting kit including all cables, clamps, p-clips, cable ties, chassis stops, convoluted cable trunking, control board and remote control.
The Quattro® Rhodium trailer mover is a powerful and lightweight trailer mover. It has been a market leader since it’s inception in 2016 and was voted the ‘best caravan mover 2022’ by Practical Caravan magazine.
The EGO500 mover system comes complete with our Basic electronics system for easy maneuvering of your caravan or trailer. It’s cross actuation manual engagement system is easily engaged onto the wheel of your caravan using the supplied 3/4″ engagement tool.
This motor mover is perfect single axle caravans and twin axle caravans alike. What’s even better is that it can be easily upgraded from a single axle to a all wheel drive twin axle system without the need for any additional equipment!
Watch this video to safely and properly install your power trailer mover from Purple Line.
| Enduro Trailer Mover – Two Motor System | |
| Designation | Quattro Rhodium Mover – QUATTRO500 |
| Operational Voltage | 12 Volt DC |
| Minimum Current Consumption | 25 Amps |
| Maximum Current Consumption | 120 Amps |
| Power output | 495 kg |
| Speed | 11 cm / sec. |
| Weight | 36.2 kg |
| Safe Working Load (SWL) | 5000 lbs (2 motors) – up to 1.5 tonnes on a 25% incline |
| Minimum Width (caravan/trailer) | 1800 mm |
| Maximum Width (caravan/trailer) | 2400 mm |
Will the Quattro fit my trailer? Yes, the Quattro will fit any trailer. The kit comes complete with a set of chassis adapter plates that must be attached to the chassis and the Quattro then clamps onto this plate. The chassis plates are designed to fit any box section chassis (see photo below), come with bolts and nuts, and will enable the mover to fit precisely, avoiding leaf spring suspension arms, chassis cross members, and any other obstructions. The ground clearance from the bottom of the chassis must be a minimum of 165mm – the Quattro will decrease by 50mm.
Will the Quattro fit on twin axle trailers? Yes, the Quattro will fit all single axle and most twin axle trailers. Refer to the fitting instructions in the product manual and if still unsure contact us.
Can I fit the Quattro myself? Please review the User Manual which may help you to decide if self-fit is an option, or contact us for further advice. Alternatively, please contact your dealer or a mobile fitter.
Does the Quattro have a soft start and stop? It has precision control operation and provides excellent accuracy.
Is the Quattro suitable for tough road conditions? Yes, the Quattro is tough and durable, ideally suited to the demands of outback roads.
Where is the best location for the mover? The best location for the Quattro is in front of the axle. However, if this is not possible it is usually possible to fit behind the axle. Please contact us or your dealer for advice.
Does it fit on a trailer with shock absorbers? Yes.
Where do I find the serial numbers? The serial numbers are located on the ends of the motor assemblies; there are two serial numbers, one on each motor, and both numbers must be provided when completing your product registration.
How much clearance back from the tires do I need? You will need 16” of clearance back from the tire to have enough room to install the Trailer Mover. Steps can be re-positioned and wastewater outlets can be moved or extended as required.
Isolation switch fitted to prevent accidental use of the remote
Unique double press on the handset button to prevent accidental operation
The Control unit and handset will shut down automatically after 60 seconds if the handset is not used in that time
The Control unit will shut down if the mover is working constantly in one direction for 3 minutes
Built-in motor overload protection (current and temperature) – no requirement for a fuse
Automatically braked immediately as soon as the handset button is released
